High Quality Overhead Crane Malaysia
Overhead Crane Manufacturer
POWERTECHNIC is a licensed crane manufacturer/specialist. Our crane equipped with Europe hoists, branded electrical components and designed with extra safety factor to optimize safety & work efficiency.
- Gantry Crane
- Jib Crane
- Overhead Crane
- Underhung Crane
- Wall Crane
- Chain Hoist
- Monorial Hoist
- Wire Rope Hoist
An overhead crane is a crucial piece of equipment for factories and industrial facilities, providing efficient material handling solutions that improve workflow and safety. These cranes are designed to lift and transport heavy loads across large areas, making them essential for optimizing production processes. By incorporating overhead cranes, factory owners can reduce manual labor, minimize downtime, and enhance overall productivity, ultimately leading to significant cost savings.
As a reputable overhead crane supplier Malaysia, Powertechnic offers high-quality overhead crane systems. Their team of experts specializes in delivering professional installations tailored to each business’s unique needs. With their extensive experience, they ensure that every installation meets the highest performance and safety standards. For factory owners looking to streamline operations and boost efficiency, Powertechnic provides reliable overhead crane solutions that offer long-term value and support business growth.
Product Features
- Designed with extra safety factor
- Low dead weight and high rigidity
- Maximum deflection: < 1/750mm of the Span
- Cross and long travel safety protection
- Precise manoeuvre; Double speed for soft start and soft stop
- Revolving light and buzzers for additional safety
- Anti-collision sensors for multiple cranes within a bay
- Suspended, mobile or wireless control options
- Industrial premium coating (1 layer primer and 2 layer finishing)
Technical Specification
- Safe Working Load: 500kg-500ton
- Span: 3m – 50m
- Lifting Height: 3m – 100m
- Hoist Type: Europe Wire Rope Hoist/Chain Hoist
- Hoist Motor Duty: FEM 2m – FEM 4m
- Control Voltage: 48volts
- Hoisting Speed: 4 / 1.3 m/min
- Cross Travel Speed: 20 / 5 m/min
- Long Travel Speed: 3…30 m/min
Our crane project incorporates hoist products from Europe Standard Hoisting Mechanism, which are CE-marked to confirm compliance with the Machinery Directive 2006/42/EC. This directive establishes the regulatory foundation for health and safety standards across the European Union.
- Compliance with Machinery Directive 2006/42/EC
- Thermal protection and Water resistant : IP 54
- Self-lubricating Gear Box
- Self-Braking Lifting Motor
- Overload Protection System
- High Tensile Wire Rope
- Wire Rope Guide
- Hoisting Limit Switch
Our crane project incorporates hoist products from Europe Standard Hoisting Mechanism, which are CE-marked to confirm compliance with the Machinery Directive 2006/42/EC. This directive establishes the regulatory foundation for health and safety standards across the European Union.
TYPE OF CRANE
OVERHEAD CRANE
Single girder or double girder design are available depending mainly on the Safe Working Load (SWL) and the Crane Span Applied.
UNDERHUNG CRANE
Underhung Crane design is having same operation mode with Overhead Crane, the only main concept is to suspend the completed crane units onto the available Building-Beams or Steel-Beams to create more available working space (Column-less). Practically, 500kg to 2000kg in Safe Working Load are being applied in industrial process-lines.
GANTRY CRANE
Gantry Cranes are operated independently on its own support Main-Leg and Auxiliary-Leg. The runway rails are rest on floor level which could allow the Crane units to be applied commonly at outdoor or indoor area without affecting the building structure. Sometime, the design could be in Semi-Gantry Crane form, whereby only the Auxiliary-Leg will be running on floor level, the other long travel components will be running on designed runway beams at higher level.
JIB CRANE
Jib Cranes are available in the form of “independent Column-Mounted” or “Wall-Mounted”. The Jib Arm could be slewing in designed angle (90 degree to 360 degree) to cover the working area radius required. Applicable to small working section with high frequency in lifting process. Practically, Safe Working Load or 500kg to 2000kg are generally applied.
WALL CRANE
Wall Cranes are installed to travel along the building wall with the support or runway beams. Generally, this crane design is applied to support heavy lifting usage in machining or second processing line, whereby the main building overhead crane on top of it are not able to fully support. As supporting crane, the SWL are usually in the form or 500kg to 3200kg.
MONORAIL HOIST
Mostly applied to facilitated the transforming of goods or items from Point-A to Pointed-B which could be reached in-line. Curved Monorail Hoist are available to suit the served points required which one not in a single straight line. Retractable Monorail Hoist are designed to retract-in the main monorail beam, mainly to reserve the way for the closing of building access doors.
WIRE ROPE HOIST
LOW HEADROOM HOIST
STANDARD FEATURES
- Capacity: from 0,8 to 50 t
- Duty mode (FEM): from 1 Am to 3 m
- Reeving: 2/1, 4/1
- Lifting speed: V1 and V2
- Lifting height: from 7 to 32 m
NORMAL HEADROOM HOIST
STANDARD FEATURES
- Capacity: from 0,8 to 50 t
- Duty mode (FEM): from 1 Am to 3 m
- Reeving: 2/1, 4/1
- Lifting speed: V1 and V2
- Lifting height: from 7 to 32 m
STATIONARY HOIST
STANDARD FEATURES
- Capacity: from 0,8 to 50 t
- Duty mode (FEM): from 1 Am to 3 m
- Reeving: 2/1, 4/1
- Lifting speed: V1 and V2
- Lifting height: from 7 to 32 m
DOUBLE RAIL HOIST
STANDARD FEATURES
- Travel speed (m/min): 20/5, 15/3,8
- Capacity: up to 16000 kg
CHAIN HOIST
CHAIN HOIST
STANDARD FEATURES
- Capacity: 0.5 – 2 ton
- Lifting Speed: Single / Double speed
- Lifting height: 5 m (or upon request)
- Trolley: Motorized, plain, or gear trolley
Get your overhead crane Malaysia with us today!
HOIST
Hoist Origin
BULGARIA, EUROPE
Driven Motor
DUAL SPEED
Hoist Motor Duty
FEM 2M (HEAVY DUTY)
Hoisting Speed
4 / 1.3 M / MIN
Ingress Protection Rating
IP 54
STRUCTURE DESIGN
Design Standard
BS EN 2573
Hardener Coat
1 LAYER PRIMER
& 2 LAYER FINISHING
ELECTRICAL COMPONENT
Branded Electrical Components
SCHNEIDER / ABB
Control Boxes
MAIN(L1) / AUXILIARY(L2)
LICENSING APPROVAL
JKKP Cover
Insurance Cover